08:00
09:00
10:00
11:00
12:00
13:00
14:00
15:00
›8:30 (30min)
8:30 - 9:00 (30min)
Coffee break
9:00 - 10:40 (1h40)
Computational Fretting-Fatigue
Espace Simondon
› To be confirmed - Modelling of multiple coupled normal and tangential contacts, application to the simulation of axial blade/disk attachments
- Ben KABONDO KASHALA, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Safran Aircraft Engines
09:00-09:20 (20min)
› Digital twins for fretting in submarine power cables
- Chun Ting Poon, College of Science and Engineering, University of Galway, Galway, Ireland, MaREI SFI Research Centre for Energy, Climate and Marine, University of Galway, Ireland
09:20-09:40 (20min)
› Fretting in an anisotropic contact: a 2D non-local approach for a cubic material
- Danilo R. S. Resende, Université Paris-Saclay, Universidade de Brasilia = University of Brasilia [Brasília], Safran Aircraft Engines
09:40-10:00 (20min)
› To be confirmed - On the fatigue life prediction of overhead conductors using neural networks
- Giorgio André Brito Oliveira, Universidade de Brasilia = University of Brasilia [Brasília] - Raphael Cardoso, Universidade de Brasilia = University of Brasilia [Brasília] - José Alexander Araújo, Universidade de Brasilia = University of Brasilia [Brasília]
10:00-10:20 (20min)
› To be confirmed - Influence of Finite Friction on Pin Separation and Crack Growth in Deformable Pin Lug Assembly
- Ramanath MN, Indian Institute of Technology Madras - H Murthy, Indian Institute of Technology Madras
10:20-10:40 (20min)
›10:40 (20min)
10:40 - 11:00 (20min)
Coffee break
›11:00 (1h20)
11:00 - 12:20 (1h20)
Wear & Fretting-Wear
› Characterization of fretting damage formation via adhesive process – comparing different running conditions
- Repekka Kovanen, Tampere University
11:00-11:20 (20min)
› To be confirmed - Fretting fatigue and torsional fretting wear of PC/ABS blends: effect of variable amplitude.
- Thiago Pandim, Universidade de Brasilia = University of Brasilia [Brasília]
11:20-11:40 (20min)
› Tribological behavior in fretting of Inconel 718 alloy obtained by additive manufacturing
- Vincent FRIDRICI, Ecole Centrale de Lyon - LTDS, Laboratoire de tribologie et dynamique des systèmes
11:40-12:00 (20min)
› To be confirmed - Tribologically transformed zones in fretting contacts and the dependence of their formation on the conditions of wear and the resulting rate determining process
- Philip Shipway, University of Nottingham
12:00-12:20 (20min)
›12:20 (1h20)
12:20 - 13:40 (1h20)
Lunch
13:40 - 15:20 (1h40)
Experimental Fretting-Fatigue
Espace Simondon
› To be confirmed - Fretting Fatigue Damage of Steam Turbine Stainless Steel at High Temperature
- Helmi Helmi Attia, National Research Council of Canada, Department of Mechanical Engineering, McGill University
13:40-14:00 (20min)
› Understanding Hydrogen-Induced Degradation in Fretting Fatigue Strength
- Kodai Araki, Kyushu Institute of Technology
14:00-14:20 (20min)
› Experimental analysis of fretting fatigue life under multilevel normal load conditions
- Sylvie POMMIER, Laboratoire de Mécanique et Technologie
14:20-14:40 (20min)
› Calorimetric Analysis of Fretting Fatigue: Investigating Microplasticity in 35NiCrMo6 Steel
- Bruno Berthel, Laboratoire de Tribologie et Dynamique des Systèmes
14:40-15:00 (20min)
› To be confirmed - Fretting fatigue behaviour of SLM Ti vs. Ti6Al4V
- Jesús Vázquez Valeo, Universidad de Sevilla
15:00-15:20 (20min)
