› To be confirmed - Fatigue life and crack growth of Inconel 718 superalloy at room and high temperature under fretting fatigue - Maria Moreno Rubio, University of Seville
09:00-09:20 (20min)
› To be confirmed - Experimental and numerical study of the influence of plastic strain field on fretting fatigue life - Lucival Malcher, INEGI
09:20-09:40 (20min)
› To be confirmed - Low-Cycle Fatigue Analysis and Structural Optimization of Exhaust Manifolds Using Simulated Specimens in High-Power-Density Diesel Engines - Xu Fang, Kunming University of Science and Technology - Xiwen Deng, Kunming University of Science and Technology
09:40-10:00 (20min)
› To be confirmed - Experimental study and modelling of fretting-fatigue-corrosion of galvanized steel in power lines - Clément Medrala, Centre des Matériaux, Réseau de Transport d'Electricité [Paris]
10:00-10:20 (20min)
› To be confirmed - Prediction of fretting fatigue failure - Antti Mäntylä, Jouko Hintikka, Ville Vanhala, Joona Vaara, Tero Frondelius, Repekka Kovanen, Minnamari Vippola
10:20-10:40 (20min)
› Length scale effects on the fretting wear of DLC coating systems - Samuel McMaster, Coventry University, Pillarhouse International - Tomasz Liskiewicz, Manchester Metropolitan University
11:00-11:20 (20min)
› To be confirmed : Artificial Neural Networks to Accelerate Wear Simulation in Fretting Fatigue Analysis - André Luís Rodrigues Araújo, Federal Institute of Brasilia
11:20-11:40 (20min)
› To be confirmed - Fretting Wear response of a 304L stainless steel contact in pressurized hydrogen up 25 MPa: comparison versus air and Helium - Mohammed Fartas, Mines Paris - PSL (École nationale supérieure des mines de Paris)
11:40-12:00 (20min)
› Reciprocating Wear Damage in Steam Turbine Grid Valves: Influence of Coatings and Thermochemical Surface Treatments - Mario Lavella, Università degli Studi di Bergamo = University of Bergamo
12:00-12:20 (20min)
› To be confirmed - Fretting Fatigue Modelling: Combining Crack Initiation and Propagation with multiaxial fatigue and Phase-Field - Iñigo Llavori, Mondragon Unibertsitatea, Mechanical and Industrial Production Department, Mondragon Unibertsitatea
13:40-14:00 (20min)
› To be confirmed : A cross-validation approach in neural networks for fretting fatigue prediction on Al 7075 T651 - Zacarías Conde-Teruel, Universidad de Sevilla
14:00-14:20 (20min)
› To be confirmed : A Computationally Efficient Hybrid Technique for Three-Dimensional Contact Analysis - H Murthy, Indian Institute of Technology Madras
14:20-14:40 (20min)
› To be confirmed : A nonlocal ANN framework for predicting fretting fatigue life - Raphael Araújo Cardoso, University of Brasília
14:40-15:00 (20min)
› Study on the Effect of Grain Orientation on Fretting Fatigue Behavior Using CPFEM - Sutao Han, Oxford Brookes University
15:00-15:20 (20min)
› To be confirmed - Experimental and numerical study of shrink-fitted assemblies under fretting fatigue solicitations: effect of interference and geometry - Morgan Fourcin, Centre des Matériaux, Naval Group
15:40-16:00 (20min)
› To be confirmed - Numerical modelling of sphere-to-flat cyclical indentation of polycarbonate: fatigue, fretting wear and fracture - Thiago Doca, Universidade de Brasilia = University of Brasilia [Brasília]
16:00-16:20 (20min)
› To be confirmed - Effect of Contact Rotation on Fretting Fatigue Crack Initiation and Propagation in Total Sliding Conditions - Pierre ARNAUD, Mines Paris - PSL (École nationale supérieure des mines de Paris)
16:20-16:40 (20min)
› To be confirmed - Prediction of the fretting-fatigue endurance of shrink fit lug-bush assemblies: a local Fretting Wear Spot correction - Siegfried Fouvry, Centre des Matériaux, Laboratoire de Tribologie et Dynamique des Systèmes
16:40-17:00 (20min)
› To be confirmed - Modelling of multiple coupled normal and tangential contacts, application to the simulation of axial blade/disk attachments - Ben KABONDO KASHALA, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Safran Aircraft Engines
09:00-09:20 (20min)
› Digital twins for fretting in submarine power cables - Chun Ting Poon, College of Science and Engineering, University of Galway, Galway, Ireland, MaREI SFI Research Centre for Energy, Climate and Marine, University of Galway, Ireland
09:20-09:40 (20min)
› Fretting in an anisotropic contact: a 2D non-local approach for a cubic material - Danilo R. S. Resende, Université Paris-Saclay, Universidade de Brasilia = University of Brasilia [Brasília], Safran Aircraft Engines
09:40-10:00 (20min)
› To be confirmed - On the fatigue life prediction of overhead conductors using neural networks - Giorgio André Brito Oliveira, Universidade de Brasilia = University of Brasilia [Brasília] - Raphael Cardoso, Universidade de Brasilia = University of Brasilia [Brasília] - José Alexander Araújo, Universidade de Brasilia = University of Brasilia [Brasília]
10:00-10:20 (20min)
› To be confirmed - Influence of Finite Friction on Pin Separation and Crack Growth in Deformable Pin Lug Assembly - Ramanath MN, Indian Institute of Technology Madras - H Murthy, Indian Institute of Technology Madras
10:20-10:40 (20min)
› Characterization of fretting damage formation via adhesive process – comparing different running conditions - Repekka Kovanen, Tampere University
11:00-11:20 (20min)
› To be confirmed - Fretting fatigue and torsional fretting wear of PC/ABS blends: effect of variable amplitude. - Thiago Pandim, Universidade de Brasilia = University of Brasilia [Brasília]
11:20-11:40 (20min)
› Tribological behavior in fretting of Inconel 718 alloy obtained by additive manufacturing - Vincent FRIDRICI, Ecole Centrale de Lyon - LTDS, Laboratoire de tribologie et dynamique des systèmes
11:40-12:00 (20min)
› To be confirmed - Tribologically transformed zones in fretting contacts and the dependence of their formation on the conditions of wear and the resulting rate determining process - Philip Shipway, University of Nottingham
12:00-12:20 (20min)
› To be confirmed - Fretting Fatigue Damage of Steam Turbine Stainless Steel at High Temperature - Helmi Helmi Attia, National Research Council of Canada, Department of Mechanical Engineering, McGill University
13:40-14:00 (20min)
› Understanding Hydrogen-Induced Degradation in Fretting Fatigue Strength - Kodai Araki, Kyushu Institute of Technology
14:00-14:20 (20min)
› Experimental analysis of fretting fatigue life under multilevel normal load conditions - Sylvie POMMIER, Laboratoire de Mécanique et Technologie
14:20-14:40 (20min)
› Calorimetric Analysis of Fretting Fatigue: Investigating Microplasticity in 35NiCrMo6 Steel - Bruno Berthel, Laboratoire de Tribologie et Dynamique des Systèmes
14:40-15:00 (20min)
› To be confirmed - Fretting fatigue behaviour of SLM Ti vs. Ti6Al4V - Jesús Vázquez Valeo, Universidad de Sevilla
15:00-15:20 (20min)
› Fretting Fatigue Behaviour of Laser Powder Bed Fusion-Produced Ti-6Al-4V: Experimental and Numerical Analysis - Reza Talemi, KU Leuven, Department of Materials Engineering, Leuven, 3001, Belgium
09:00-09:20 (20min)
› To be confirmed - Fretting fatigue tests and life estimation under out-of-phase and asynchronous contact loads - José Alexander Araújo, Universidade de Brasilia = University of Brasilia [Brasília]
09:20-09:40 (20min)
› Influence of Subsurface Defects and Material Anisotropy on the Fretting Fatigue Response of AMed Ti-6Al-4V - Reza Talemi, KU Leuven, Department of Materials Engineering, Leuven, 3001, Belgium
09:40-10:00 (20min)
› Fretting - Fatigue: State of the art in Helicopter - GAEL MONAVON, Airbus Helicopters
10:00-10:20 (20min)
› Fretting - Fatigue: State of the art in Helicopter 2 - GAEL MONAVON, Airbus Helicopters
10:20-10:40 (20min)
› Asymptotic Representation of Contact Edges with Partial Slip - Beth Eames, University of Oxford
11:00-11:20 (20min)
› Asymptotic Representation of Contact Edges with Varying Normal Load - David Hills, Department of Engineering Science, University of Oxford
11:20-11:40 (20min)
› Forty Years of Fretting Fatigue - Nowell David, Imperial College London
11:40-12:00 (20min)
Loading... 
Espace Simondon
