› To be confirmed - Fatigue life and crack growth of Inconel 718 superalloy at room and high temperature under fretting fatigue - Maria Moreno Rubio, University of Seville
09:00-09:20 (20min)
› To be confirmed - Experimental and numerical study of the influence of plastic strain field on fretting fatigue life - Lucival Malcher, INEGI
09:20-09:40 (20min)
› To be confirmed - Low-Cycle Fatigue Analysis and Structural Optimization of Exhaust Manifolds Using Simulated Specimens in High-Power-Density Diesel Engines - Xu Fang, Kunming University of Science and Technology - Xiwen Deng, Kunming University of Science and Technology
09:40-10:00 (20min)
› To be confirmed - Experimental study and modelling of fretting-fatigue-corrosion of galvanized steel in power lines - Clément Medrala, Centre des Matériaux, Réseau de Transport d'Electricité [Paris]
10:00-10:20 (20min)
› To be confirmed - Prediction of fretting fatigue failure - Antti Mäntylä, Jouko Hintikka, Ville Vanhala, Joona Vaara, Tero Frondelius, Repekka Kovanen, Minnamari Vippola
10:20-10:40 (20min)
› Length scale effects on the fretting wear of DLC coating systems - Samuel McMaster, Coventry University, Pillarhouse International - Tomasz Liskiewicz, Manchester Metropolitan University
11:00-11:20 (20min)
› To be confirmed : Artificial Neural Networks to Accelerate Wear Simulation in Fretting Fatigue Analysis - André Luís Rodrigues Araújo, Federal Institute of Brasilia
11:20-11:40 (20min)
› To be confirmed - Fretting Wear response of a 304L stainless steel contact in pressurized hydrogen up 25 MPa: comparison versus air and Helium - Mohammed Fartas, Mines Paris - PSL (École nationale supérieure des mines de Paris)
11:40-12:00 (20min)
› Reciprocating Wear Damage in Steam Turbine Grid Valves: Influence of Coatings and Thermochemical Surface Treatments - Mario Lavella, Università degli Studi di Bergamo = University of Bergamo
12:00-12:20 (20min)
› To be confirmed - Fretting Fatigue Modelling: Combining Crack Initiation and Propagation with multiaxial fatigue and Phase-Field - Iñigo Llavori, Mondragon Unibertsitatea, Mechanical and Industrial Production Department, Mondragon Unibertsitatea
13:40-14:00 (20min)
› To be confirmed : A cross-validation approach in neural networks for fretting fatigue prediction on Al 7075 T651 - Zacarías Conde-Teruel, Universidad de Sevilla
14:00-14:20 (20min)
› To be confirmed : A Computationally Efficient Hybrid Technique for Three-Dimensional Contact Analysis - H Murthy, Indian Institute of Technology Madras
14:20-14:40 (20min)
› To be confirmed : A nonlocal ANN framework for predicting fretting fatigue life - Raphael Araújo Cardoso, University of Brasília
14:40-15:00 (20min)
› Study on the Effect of Grain Orientation on Fretting Fatigue Behavior Using CPFEM - Sutao Han, Oxford Brookes University
15:00-15:20 (20min)
› To be confirmed - Experimental and numerical study of shrink-fitted assemblies under fretting fatigue solicitations: effect of interference and geometry - Morgan Fourcin, Centre des Matériaux, Naval Group
15:40-16:00 (20min)
› To be confirmed - Numerical modelling of sphere-to-flat cyclical indentation of polycarbonate: fatigue, fretting wear and fracture - Thiago Doca, Universidade de Brasilia = University of Brasilia [Brasília]
16:00-16:20 (20min)
› To be confirmed - Effect of Contact Rotation on Fretting Fatigue Crack Initiation and Propagation in Total Sliding Conditions - Pierre ARNAUD, Mines Paris - PSL (École nationale supérieure des mines de Paris)
16:20-16:40 (20min)
› To be confirmed - Prediction of the fretting-fatigue endurance of shrink fit lug-bush assemblies: a local Fretting Wear Spot correction - Siegfried Fouvry, Centre des Matériaux, Laboratoire de Tribologie et Dynamique des Systèmes
16:40-17:00 (20min)
Loading... 
Espace Simondon
